Hydroxyl Generator

How to Effectively Use the Ozone Titan 4000 Hydroxyl Generator

How to Effectively Use the Ozone Titan 4000 Hydroxyl Generator

Hydroxyl generators, like the Ozone Titan 4000, are essential tools for improving air quality by neutralising odours, bacteria, and other contaminants. Whether you're dealing with smoke damage, mould, or simply want to ensure a cleaner environment, this guide will help you use the Ozone Titan 4000 effectively and safely.

Safety First

Before diving into the setup and operation, it's crucial to understand the safety measures:

  1. Read the Manual: Always start by thoroughly reading the safety sticker located on your Ozone Titan 4000.
  2. Wear Protective Gear: Equip yourself with gloves and safety goggles to protect against any potential hazards.
  3. Ensure Ventilation: Proper ventilation is key. Make sure the area you're treating is well-ventilated.
  4. Avoid Direct Exposure: Do not expose yourself or others directly to the hydroxyl output.

Setting Up the Ozone Titan 4000

  1. Unpacking:
    • Carefully unpack your hydroxyl generator and inspect it for any shipping damage.
  2. Placement:
    • Place the unit in the centre of the area you intend to treat. Make sure it's on a flat and stable surface to prevent any accidents.
  3. Power Connection:
    • Plug the unit into a standard electrical outlet. Ensure the power cord is safely positioned to avoid tripping hazards.
  4. Adjust Settings:
    • Turn the power switch to the "ON" position. Start with a lower setting on the control knob and adjust as needed based on the contamination level.

Operation Guidelines

  1. Determine Operation Duration:
    • The operation time varies based on the size of the area and the contamination level. Typically, 1 to 4 hours is sufficient for moderate contamination. For more severe cases, you may need to run the unit longer.
  2. Monitor the Unit:
    • Periodically check the unit to ensure its operating correctly. Maintain good ventilation throughout the process.

After Operation

  1. Turn Off the Unit:
    • Once the treatment time has elapsed, turn the power switch to the "OFF" position.
  2. Unplug and Store:
    • Unplug the unit and store it in a cool, dry place. Ensure the unit is clean and dry before storage.
  3. Maintenance:
    • Regular maintenance is essential. Clean the exterior with a damp cloth and replace filters and other consumables as recommended in the user manual.

Troubleshooting Common Issues

  1. Unit Does Not Turn On:
    • Check the power connection and ensure the unit is properly plugged in. Verify the circuit breaker and reset if necessary.
  2. Insufficient Hydroxyl Output:
    • Make sure the output setting is correct. Clean or replace the filters if they are clogged or dirty.
  3. Unusual Noises:
    • Turn off the unit and inspect for any foreign objects or debris. Ensure the unit is on a stable surface.

Need Help?

If you encounter any issues beyond basic troubleshooting or require repair, contact the FRAHire or the manufacturer for assistance.

Support: 1300 054 485

Using the Ozone Titan 4000 hydroxyl generator is a great way to ensure a cleaner and healthier environment. By following these guidelines, you can maximise its effectiveness while maintaining safety and efficiency. Always refer to the user manual for detailed instructions and safety guidelines. Happy cleaning!

Back to blog